1230 Automatic Fire Suppression Systems, developed for fire prevention and control inside high and low voltage distribution cabinets, is based on various temperature monitoring methods such as fire tube detection technology, flame detection technology, infrared thermal imaging detection technology and dual-band detection technology. Through customizable scheme design, fire extinguishing Agent pipe network spray devices, automatic early warning technology and special-shaped drive technology are used to prevent and control fires in electrical facilities such as distribution cabinets, electrical rooms, engineering vehicles, and urban buses. There are a large number of installation examples in many areas. Today we will introduce the following aspects to let everyone know about 1230 Automatic Fire Suppression Systems.
What functions does 1230 Automatic Fire Suppression Systems have?
1. Precise positioning function of flammable space: You can use the temperature signal feedback function to know in a timely manner which part of the protected space has a fire. During the detection process, the detector located in the flammable space transmits the temperature changes to the control unit in real time. When the temperature signal provided is higher than the set warning value, the location can be determined as the fire source.
2. Perfluorohexanone automatic spray function: The fire extinguishing agent spraying process is also called the fire extinguishing process. Fire extinguishing instructions are issued through the control unit, and the perfluorohexanone special pipeline is used to release the agent to the fire source through a special nozzle. The agent nozzle The spray direction can be appropriately adjusted according to the layout of the protective space to ensure that the entire protective space is covered by perfluorohexanone.
3. Self-test function: It can self-test whether the driving pressure, detector, starting valve, etc. within 1230 Automatic Fire Suppression Systems are operating normally. Through the pressure gauge value, you can intuitively judge whether the device is driving abnormally. Insert the safety pin, perform fire simulation or start the manual valve. body, observe whether the electromagnet is abnormal, and then determine whether the device is operating normally.
1230 Automatic Fire Suppression Systems application process
1. First, install the detector above the protected object, use the detector to receive the temperature conditions from around the protected object, and transmit it to the control unit in real time to provide data support for the operation of the single automatic fire extinguishing device.
2. The start-up of 1230 Automatic Fire Suppression Systems can be designed with a delayed start-up procedure according to the actual situation, that is, an early warning signal is first sent out and then the automatic start-up of the fire extinguishing device is delayed to give the operator a buffer time. In an unattended protective space, it can be designed to detect The fire starts directly.
3. When a fire occurs, the automatic fire extinguishing function can also be realized through the manual start button.
The relevant knowledge about 1230 Automatic Fire Suppression Systems will be shared with you here. If you need to know more information, you are welcome to come to the company for on-site inspection and look forward to communicating with you.
