Application of water-based regional fire prevention and extinguishing system for industrial and mining vehicles in rock drilling rigs
golden mean fire-fighting equipment co.ltd is an early unit that develops and produces water-based area fire protection and extinguishing systems for industrial and mining vehicles and fire extinguishing devices for port vehicles. The water-based area fire-extinguishing system for industrial and mining vehicles is an advanced vehicle automatic fire-extinguishing technology at home and abroad. Compared with traditional fire extinguishing technology, this technology has the characteristics of fast fire extinguishing speed, long fire extinguishing injection time, good controllability (manual, automatic, mechanical emergency start), non-polluting fire extinguishing, harmless to human body, and can avoid secondary re-ignition. The device uses a new type of water-based fire extinguishing agent, and its fire extinguishing mechanism has physical and chemical effects. It can perform fire extinguishing operations on vehicles in extremely cold weather, such as vehicles operating in weather conditions above minus 50 degrees Celsius. This fire-extinguishing agent is the most suitable fire-extinguishing agent among current mine car fire-extinguishing technologies, and is crucial for vehicle fire-extinguishing applications. The following is a brief introduction to its application characteristics.
There are three control methods for water-based area fire protection and extinguishing systems for industrial and mining vehicles: automatic, manual and mechanical emergency start.
1. In the automatic state, when the detector in the protected area sends out a fire signal, the sound and light alarm alarms to remind the staff to pay attention; when the second detector also sends out a fire signal, the corresponding starting bottle in the protected area starts the fire extinguishing system to extinguish the fire. The agent is released into the protected area through the pipe network for fire extinguishing.
2. When people often work in the protected area, after confirming the fire alarm, the person on duty presses the manual start button in the controller or breaks the emergency start button outside the protected area to immediately start the system and spray fire extinguishing agent.
3. When automatic and manual failures occur, the mechanical emergency operation can be started by entering the bottle storage room. Just dial out the corresponding protection zone, activate the manual safety pin on the bottle group, and shoot the manual button to complete the startup and injection operation of the entire system.
Application scope of water-based area fire protection and extinguishing systems for industrial and mining vehicles
Widely used in trackless rubber wheel vehicles, open-pit mine electric wheel vehicles, Big Macs, electric transmission mining trucks, hydraulic excavators, heavy loaders, mining dump trucks, underground explosion-proof transport vehicles, special engineering vehicles, lifting vehicles, mining trucks , Mining trucks, articulated mining dump trucks, mechanical rotating vehicles, side dump transport vehicles, mining truck engine rooms, auxiliary vehicles, excavators, diesel engine rooms, oil engine rooms, gasoline engine rooms, wide-body mining vehicles, wide-weight trucks, Use vehicles such as aerial working vehicles and hazardous chemical working vehicles to put out fires.
